Thank you for browsing our site, if you do not find the article you are looking for please let us know.
More power means that more fuel is required so we need to uprate the fuel system and we look at performance mods for your fuelling to avoid running rich or lean.
It is essential to keep the mix of air to fuel exactly right. Power is lost when the engine adjusts itself to stop it running too rich or lean. Many power losses, which manifest themselves as flat spots, at certain points in the rev band can often be traced to a fuelling issue so we will look at performance fuelling upgrades and parts.
The heads primary job is the mixing of fuel and air and delivering this to the combustion chamber.
Any turbulence or drag can restrict the air flow into the engine starving you of power. So this TorqueCars article will focus on the intake valves and how they can be improved.
The aim of head tuning is both to maximise the amount of air and fuel that gets into the engine, and to improve the mixture.
Both work on the same principle they blow air into the engine under pressure. Both have a turbine which spins up depending on the engine speed and the higher the revs the greater the volume of air is forced into the engine. But there are some major differences between the two and which is best for your project?
The valves are like the doorways into the engine and control the flow of the intake air and fuel and then after combustion they control the exit of the exhaust gases.
As you can guess the valve springs work incredibly hard, and as you increase the power of your engine the valve choice is vital.
TorqueCars will now take a look at the many considerations taken into account when selecting valve springs.
MENU
